3 Model B+ Development Kit (Type D)

Product Description

A 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
Dual-band 802.11ac wireless LAN and Bluetooth 4.2

Overview
1. 3 Model B+ is the improved version of 3 Model B, the key improvements include:
2. A 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
3. Dual-band 802.11ac wireless LAN and Bluetooth 4.2
4. Faster Ethernet (Gigabit Ethernet over USB 2.0)
5. Power-over-Ethernet support (with separate PoE HAT)
6. Improved PXE network and USB mass-storage booting
7. Improved thermal management

3 Model B+ Specifications
1. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
2. 1GB LPDDR2 SDRAM
3. 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
4. Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
5. Extended 40-pin GPIO header
6. Full-size HDMI
7. 4 USB 2.0 ports
8. CSI camera port for connecting a camera
9. DSI display port for connecting a touchscreen display
10. 4-pole stereo output and composite video port
11. Micro SD port for loading your operating system and storing data
12. 5V/2.5A DC power input
13. Power-over-Ethernet (PoE) support (requires separate PoE HAT)

ARPI600 Features
1. Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
2. XBee connector for connecting various XBee modules
3. Sensor interface for connecting various sensors
4. Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
5. Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
6. Onboard RTC

What is on the ARPI600
1. Arduino connector : for connecting Arduino shields
2. ICSP interface : Arduino ICSP
3. XBee connector : for connecting XBee communication modules
4. Sensor interface : for connecting sensors
5. connector : for connecting Pi
6. USB TO UART
7. TLC1543 : AD converter
8. PCF8563 : RTC
9. CP2102
10. 32.768KHz crystal : for RTC
11. Power indicator
12. XBee state LED
13. XBee and Arduino interface RESET button
14. XBee EASYLINK button
15. RTC battery holder : for CR1220 button battery
16. TLC1543 reference voltage configuration jumper
17. RTC jumper
18. UART jumper
- When connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to serial port
- When connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
- When connecting XB_RX and P_TX, XB_TX and P_RX respectively, serial port is connected to XBee serial port
19. Arduino AD selection jumper
- Short 2 and 3 : Arduino A0-A5 as AD input
- Short 1 and 2 : Arduino A0-A5 as digital control
20. Arduino I2C selection jumper
- Short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
21. Arduino SPI selection jumper
- Short 1 and 2 : Arduino D11-D13 as SPI control (default)
- Short 2 and 3 : Arduino D11-D13 as digital control

Package Contents
1. 3 Model B+ x1
2. ARPI600 x1
3. Sensors Pack ? 1
4. USB type A plug to mini-B plug cable x1
5. RPi screws pack (2pcs) x1
6. Micro SD Card 16GB x1
7. Power adapter US standard 5V/3A micro x1
8. Micro SD Card Reader x 1 (Extra Free)